background image

6

English

Maintaining Your Speakers

Problem 

Possible cause 

How to find out 

Solution 

If 

To clean your 141

 

series II bookshelf speakers

Wipe the Model 141 speaker cabinets clean using a soft cloth dampened with a mild 
detergent. Do not allow liquids to spill into the speaker grilles. 
No other regular maintenance is required.

Troubleshooting

If you have a problem with your 141 series II bookshelf speakers:
1.   Turn off your amplifier or receiver and check all connections between the speakers and 

the amplifier or receiver.

2.  Check your amplifier or receiver owner’s guide. That component may be the source of the 

problem.

3.   Use the troubleshooting guidelines below. If they do not solve your problem, contact your 

Bose

®

 dealer to arrange for service. Or, to contact Bose directly, refer to the listing on the 

inside back cover of this guide. Bose Corporation will make every effort to remedy any 
problem within the terms of your warranty. 

Defective speaker or  
malfunctioning receiver   
or amplifier channel.

Both speakers do not 
play or sound distorted.

Defective speaker cord.

One speaker doesn’t play 
or sounds defective.

Switch the speaker cords 
at both ends. Connect the 
right speaker cord to the 
left speaker and to the 
left speaker channel of 
the amplifier or receiver. 
Connect the left speaker 
cord to the other speaker 
and amplifier channel.

If the originally faulty speaker 
now plays properly and the 
other does not, the cord on 
the malfunctioning speaker  
is defective.

If the originally faulty speaker 
still does not play properly, 
the speaker is probably  
defective. Call Bose or your 
retailer to arrange for service.
If the originally faulty speaker 
now plays, one channel 
in  the amplifier or receiver 
is probably defective. Try 
another receiver. 

Switch the cords at the 
speaker end only. 

Reconnect the speakers to 
another amplifier or receiver 
that is working properly.

Defective amplifier 
or receiver.

Summary of Contents for 141 Series II









Reviews: