6
•
English
FreeSpace FS4SE
•
Installation Guide
PRO.BOSE.COM
Installation
Loudspeaker Orientation
Choose the loudspeaker orientation best suited for your
installation.
q
Horizontal
w
Vertical
q
w
Installing the Bracket
Note:
When choosing an installation location, at least two of the mounting bracket's attachment points must be secured to a support
structure. Attachment points not secured to a support structure must be secured using appropriate hardware for the installation. Choose
fasteners that are consistent with all local building codes and requirements.
Note:
Choose appropriate fasteners to support the weight of the loudspeaker (3.42 kg [7.55 lb]).
1.
Mark the drill holes.
2. Drill four holes (sized for appropriate fasteners) into the wall.
3. Secure the bracket to the wall with two screws (not included).
Note:
Use M6 or 1/4"-20 sized screws.
q
w
e
Wiring the Connector
1.
Feed the wires through the center hole of the bracket.
2. Insert the wires through the bottom of the input cover.
See
Preparing the Input Cover
on page 4.
3. Wire the connector. For wiring information, see
Wiring
the Loudspeaker
on page 5.
q
w
Ceramic Terminal Attachment Point
The FreeSpace FS4SE is compatible with an optional ceramic terminal accessory.
See the diagram for the location of the ceramic terminal attachment point. For
more information on the ceramic terminal, see the ceramic terminal installation
guide at
PRO.BOSE.COM
.