ControlCenter CV41 4-to-1 Converter
Use the ControlCenter CV41 4-to-1 converter to create a single home run connection back to a PowerShare PS602, PS404A, or
PS604A amplifier when multiple CC-1 zone controllers are distributed throughout an installation. Connect each zone controller to the
CV41 converter using CAT 5 cables with RJ-45 connectors, then run a single CAT 5 cable from the CV41 converter to the amplifier.
For more information, see the ControlCenter Zone Controllers Installation and Operation Guide.
CAT 5 cable
609 m (2000 ft) max
CAT 5 cable
7.6 m (25 ft) max
Adaptable Power Amplifier
LIMIT
SIGNAL
1
2
PowerShare
PS602
POWER
CAT 5 cable
609 m (2000 ft) max
CAT 5 cable
7.6 m (25 ft) max
Adaptable Power Amplifier
LIMIT
SIGNAL
1
2
3
4
PowerShare
PS604A
POWER
2.5 in
2.0 in
27 mm
1.1 in
Connect up to two CC-1 zone controllers to a PS602 amplifier, as shown below. If
the two CC-1 zone controllers are ganged together first, then the CV41 converter
is not required.
Connect up to four CC-1 zone controllers to a PS404A or PS604A amplifier, as
shown below. You can also gang any combination of CC-1 zone controllers together
first, then use the CV41 converter to create a single home run to the amplifier. All
inputs on the CV41 converter are identical, so any input combination is acceptable.
CV41 Converter Diagram
Connecting the CV41 Converter
Top View
Bottom View
Left Side View
Right Side View
pro.Bose.com
©2022 Bose Corporation, All rights reserved.
Framingham, MA 01701-9168 USA
www.pro.Bose.com
All trademarks are the property of their respective owners
AM771894 Rev. 02
April 2022
