English
•
23
Installation Guide
•
ArenaMatch Utility
PRO.BOSE.COM
Technical Specifications
AMU206
System Performance
Frequency Response (±3 dB)
1
90 Hz to 16 kHz
Frequency Range (–10 dB)
80 Hz to 16 kHz
Nominal Coverage Pattern (H × V)
120° × 60° (rotatable high-frequency horn)
Recommended High-pass Filter
80 Hz with minimum 12-dB/octave filter
Crossover
Passive; separate bandpass filters per transducer (300 Hz and 1.5 kHz)
70V/100V transformer tap settings
70V: 5W, 10W, 20W, 40W, 80W; 100V: 10W, 20W, 40W, 80W
Bose Extended Lifecycle Test
2
AES Transducer Test
3
Power Handling, long-term continuous
250 W
300 W
Power Handling, peak
1000 W
1200 W
Free Field
Wall/Ceiling
Free Field
Wall/Ceiling
Sensitivity (SPL / 1 W @ 1 m)
4
90 dB
92 dB
90 dB
92 dB
Calculated Maximum SPL @ 1 m
5
114 dB
116 dB
115 dB
117 dB
Calculated Maximum SPL @ 1 m, peak
120 dB
122 dB
121 dB
123 dB
Transducers
Low Frequency
2 × Bose LF6 high-excursion 6-inch woofer (2-inch voice coil)
High Frequency
1 × Bose EMB2S titanium-diaphragm, neodymium compression drivers (2-inch voice coil)
Nominal Impedance
8 Ω
Physical
Enclosure Material
Exterior-grade birch plywood
Finish
Two-part polyurethane coating, black or white
Grille
Powder-coated perforated stainless steel, acoustic foam, stainless steel mesh
Environmental
Rated for direct-exposure outdoor installations (IEC 60529: IP55)
Connectors
1 × barrier strip (accepts 10 to 18 wire gauge)
Suspension/Mounting
3 × M8 threaded inserts for U-bracket (per side); 4 × M8 threaded inserts on rear surface
(127 × 70 mm, 4-bolt pattern)
Dimensions (H × W × D) – millimeters
191 × 580 × 289 with U-bracket
Dimensions (H × W × D) – inches
7.5 × 22.8 × 11.4 with U-bracket
Net Weight (loudspeaker only)
12.2 kg (26.8 lb)
Net Weight (with U-bracket)
13.8 kg (30.5 lb)
Shipping Weight
16.1 kg (35.5 lb)
Accessories
Included steel U-bracket; optional pan-and-tilt bracket
Footnotes
1.
Frequency response and range measured on-axis in anechoic environment with recommended bandpass and EQ.
2.
Bose extended-lifecycle test using pink noise filtered to meet IEC268-5, 6-dB crest factor, 500-hour duration.
3.
AES standard 2-hour duration with IEC system noise.
4.
Sensitivity measured in anechoic environment with recommended bandpass and EQ.
5.
Maximum SPL calculated using sensitivity and power ratings, exclusive of power compression.