background image

en 

Safety

8

Unwashed laundry that has come into contact with solvents, oil,
wax, wax remover, paint, grease or stain remover may ignite when
drying is in progress.

Do not place laundry in this appliance to be dried if the laundry
has not been washed first.

Rinse the laundry thoroughly with warm water and detergent be-
fore drying it in the machine.

Do not use the appliance if industrial chemicals have been used
to clean the laundry beforehand.

Laundry that has been pretreated with cleaning agents that con-
tain solvents may cause an explosion in the appliance.

Rinse pretreated laundry thoroughly with water before washing.

WARNING ‒ Risk of fire!

If drying is interrupted early, the laundry is not cooled sufficiently
and may ignite.

Do not interrupt the drying programme early.

If drying is interrupted early, remove the laundry immediately
and spread it out.

CAUTION ‒ Risk of injury!

The covering plate may break if you stand on or climb onto the
appliance.

Do not stand on or climb onto the appliance.

The appliance may tip over if you sit on or lean against the open
door.

Do not sit on or lean against the appliance door.

Do not place any objects on the appliance door.

Reaching into the drum while it is still turning may cause hand in-
juries.

Wait for the drum to come to a complete stop before reaching
inside.

CAUTION ‒ Risk of scalding!

When you wash at high temperatures, the detergent solution gets
hot.

Do not touch the hot detergent solution.

Summary of Contents for XQG100-WJVM45110W





























































Reviews: