en
Installation and connection
14
1.
Tilt the appliance to the rear.
2.
Remove the foam tray under the
appliance.
3.
Remove the foam block.
4.
Fit the bottom cover (which you
can find in the drum). Press the
bottom cover fully into the holes in
the base plate.
Note:
If necessary, secure the bot-
tom cover with screws.
4.5 Removing the transit
bolts
The appliance is secured for trans-
portation using transit bolts on the
rear of the appliance.
Note:
Keep the transit bolt screws
and the sleeves in a safe place for fu-
ture transport →
1.
Pull the hoses out of the holders.
Summary of Contents for XQG100-WDU285H80W
Page 55: ......