Bosch XDK, Manual

Page: 9 / 12

9 ©2019 Software AG. All rights reserved.
If this doesn't help pls. flash a standard click app to the device, e.g
LedsandButtons
. If this
works try to flash the device agent again.
22 Log in XDK Workbench shows
----- HEAP ISSUE ----
When you see an exception as below, then you should increase the heap size
in
xdk110/Common/config/AmazonFreeRTOS/FreeRTOS/FreeRTOSConfig.h
.
INFO | XDK DEVICE 2: MQTTOperation_Init: Reading boot status: [0]
INFO | XDK DEVICE 2: SntpSentCallback : Success
INFO | XDK DEVICE 2: SntpTimeCallback : received
INFO | XDK DEVICE 2: ----- HEAP ISSUE ----
INFO | XDK DEVICE 2: MQTT_ConnectToBroker_Z: Failed since Connect event was not
received
INFO | XDK DEVICE 2: MQTTOperation: MQTT connection to the broker failed [0] time,
try again ...
Increase heap size in
xdk110/Common/config/AmazonFreeRTOS/FreeRTOS/FreeRTOSConfig.h
by
changing the following value:
#define configTOTAL_HEAP_SIZE (( size_t )(72 * 1024 )) # old value
is (( size_t )(70 * 1024 ))
23 Config file cannot be pared
Please verify if you used Linux line endings
\n
back to content
24 Sample dashboards
25 Dashboard with SCADA widget
A sample dashboard can be build using the resources/Container_V01.svg.
Please see:
https://www.cumulocity.com/guides/users-guide/optional-services/ for a
documentation on how to use the svg in a SCADA widget.