Installation and connection
en
39
Removing the transportation
protection devices
Caution!
Damage to the appliance
■
Before using the washer dryer for the
first time, it is essential to remove all
4 transportation protection devices.
Keep the transportation protection
devices. The washer dryer is
secured for transportation with
transportation protection devices.
Transportation protection devices
which have not been removed may
damage the drum, for example,
while the washer dryer is running.
■
To prevent damage in transit when
transporting the appliance at a later
date, always re-install the
transportation protection devices
prior to transportation
Keep the screw and sleeve screwed
together.
1.
Take the hoses out of the holders.
2.
Take hoses out of the elbow and
remove the elbow.
3.
Loosen and remove all
4 transportation lock screws.
4.
Take the power cord out of the
holders. Remove the sleeves.
5.
Insert the covers. Lock firmly by
pressing on the locking hook. Insert
the hose holder.
Hose and cable lengths
Connection on left side
or
Connection on right side
Note:
If the hose holders are used, the
possible hose lengths are reduced!
aFP
aFP
aFP
aFP
aFP
aFP
PLQ
FP
PD[
FP
