Installation and connection
en
15
4.
Take the power cord out of the
holders. Remove the sleeves.
5.
Insert the covers. Lock firmly by
pressing on the locking hook. Insert
the hose holder.
Hose and cable lengths
Connection on left side
or
Connection on right side
Note:
If the supply hose is too short for
your connection, you can order an
extension from the after-sales service.
Connecting the water
:
Warning
Risk of electric shock!
Danger of death if live parts come into
contact with water.
Do not immerse the Aqua-Stop safety
device in water (it contains an electric
valve).
Caution!
Water damage
The connection points for the water
supply and water drainage hoses are
under high pressure. To prevent
leakage or water damage, always follow
the instructions in this chapter!
Notes
■
In addition to the safety information
listed here, the local water and
electricity supplier may have special
requirements.
■
Operate the washer dryer with cold
drinking water only.
■
Do not connect the washer dryer to
the mixer tap of an unpressurised
hot water boiler.
■
Use only the inlet hose supplied or
one purchased from an authorised
specialist outlet. Never use an used
one!
■
If in doubt, have the appliance
connected by a technician.
aFP
aFP
aFP
aFP
aFP
aFP
PLQ
FP
PD[
FP
