background image

Customer service    

en

35

4

Customer service

Customer service

If you cannot correct the fault yourself, 

see section, Faults and what to do 

about them 

~

 Page 32

Please contact our customer service.  

We will always find a suitable solution 

and aim to avoid unnecessary visits by 

technicians.
Please give customer service the 

product number (E-Nr.) and the 

production number (FD) of the 

appliance.

You can find this information on: the 

inside of the door */opened service 

flap * and the back of the appliance.
*depending on model

Rely on the competence of the 

manufacturer.

 

Contact us. You can therefore be sure 

that the repair is carried out by trained 

service technicians who carry original 

spare parts.

J

Technical 

specifications

Technical specifications

Dimensions:

 

850 x 600 x 590 mm
(height x width x depth)

Weight:

 

80 kg

Mains connection:

 

Mains voltage 220 - 240 V/50 Hz
Nominal current 10 A
Nominal power 1900 - 2300 W

Water pressure:

 

100 - 1000 kPa (1 - 10 bar)

Drain height:

 

60 - 100 cm

Power consumption when switched 

off:

 

0,12 W

Power consumption when switched 

on:

 

0,48 W

Product number

Production number

(1U

)'

Summary of Contents for WVG30441EU













































Reviews: