background image

       

2

Your new washer dryer

You have chosen a Bosch washer dryer. 

Please take a few minutes to read and 

become familiar with the advantages of 

your washer dryer.

To meet the high quality demands 

required by Bosch, every washer dryer 

that leaves our factory is carefully 

checked to ensure that it functions 

correctly and is in perfect condition.

For more information on our products, 

accessories, replacement parts and 

services, see our website www.bosch-

home.comor contact our after-sales 

service centres.

If the operating and installation 

instructions describe different models, 

any differences will be pointed out at the 

relevant points in the text.

Read these operating and installation 

instructions before switching on the 

washer dryer.

Display rules

:

 Warning!

This combination of symbol and signal 

word indicates a possibly dangerous 

situation. Not heeding the warning can 

cause death or injuries.

Caution!

This signal word indicates a possibly 

dangerous situation. Not heeding the 

caution can cause property and/or 

environmental damage.

Note/tip

Information about the optimum use of 

the appliance/any other useful 

information.

1. 2. 3. / a) b) c)

The steps are represented by numbers 

or letters.

/ -

Lists are represented by a small box or 

a dash.

Summary of Contents for WVG30441













































Reviews: