Bosch WUU24460HK, User Manual And Installation Instructions

Page: 51 / 64

Troubleshooting
en
51
Fault Cause and troubleshooting
The appliance is not
working.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other
appliances are working.
The programme does
not start. You have not pressed
Start/Reload
.
▶
Press
Start/Reload
.
Door is not closed.
1.
Close the door.
2.
Press
Start/Reload
to start the programme.
Childproof lock is activated.
▶
→ "Deactivating the childproof lock", Page 40
Finish in
is activated.
▶
Check whether
Finish in
is activated.
→ "Buttons", Page 23
Laundry is caught in the door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press
Start/Reload
to start the programme.
The door cannot
be opened.
– – – –
is activated.
▶
Continue the programme by selecting
Spin
or
Drain
and pressing
Start/Reload
.
→ "Resuming the programme when the programme
status is Rinse Hold", Page 39
The temperature is too high.
▶
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 39
Water level is too high.
▶
Start the
Drain
programme.
Power failure.
▶
Open the door using the emergency release.
→
"Emergency release", Page 57
The water is not drain-
ing. Drain pipe or water outlet hose is blocked.
▶
Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed.
▶
Ensure that the drain pipe and water drain hose are
not kinked or trapped.
Drain pump is blocked.
▶
→ "Cleaning the drain pump", Page 44