Bosch WTY888W9GR, Installation And Operating Instructions Manual

Page: 14 / 40

en
Installation and connection
14
Changing the side on which
the door is hinged
Proceed as follows to change
the side on which the door is hinged:
1.
Set the programme selector to the
"Off" position, disconnect the dryer
from the mains and open the door.
2.
Remove the screws from the dryer
and then remove the dryer door.
Note:
Use a T20 (Torx) screwdriver
only. Do not use any other tools to
change the side on which the door is
hinged.
3.
Carefully place the dryer door onto a
flat surface, and place a hand towel
or other such item between the door
and the surface to avoid scratching
or damaging the door.
4.
Now remove the screws from the
door hinge, and remove the hinge
from the dryer door.
5.
Remove the screws from the door
handle on the dryer door and
remove the door handle.
6.
Unlock the door ring.