background image

Programs and buttons       

en

27

--------

ø

 Spin class

For the spin class, set the spin speed at which the laundry has been spun in the 

washing machine. This permits the expected drying time to be indicated more pre-

cisely. Speeds of between 600 and 1800 rpm can be selected. Default setting: 

1000 rpm

ù 

Fine adjustment 

of the dryness level

If the laundry is too damp after drying, you can finely adjust the dryness levels e.g. 

Cupboard Dry. The dryness level can be increased in three stages, from +1 to +3.
If you have adjusted the dryness level, the setting for all programs with a selectable 

dryness level is retained even after the dryer is switched off.

K

 Low heat

Reduced temperature for delicate fabrics, e.g. polyacrylic or elastane, may increase 

the drying time.

9/:

(Memory 1/2)

You can save individual program settings under Memory 1 and 2.
Select the required program settings and press the 

9

 (Memory 1)

 or 

:

 

(Mem-

ory 2) 

button for 3 seconds until the display panel shows that 

Memory program 1

 

or 

2

 is saved. Your selected program settings are retained even after the dryer is 

switched off.
Default setting: No Memory program saved.

Basic settings 

3 sec.

Press both buttons at the same time and hold them for 3 seconds. The menu will be 

displayed in the display panel.

End signal, button 

signal

Select the button signal volume: off - quiet - normal - loud - very loud.
Default setting: loud

Automatic switch-off Automatically switching off the dryer after 15, 30 or 60 minutes, or never automati-

cally switching off. Default setting: 15 minutes

Language

Select the desired language in the display panel.

A

 

Start/Pause 

Starts or pauses the program.

Summary of Contents for WTY877690W













































Reviews: