background image

Safety instructions    

en

9

:

Warning

Risk of explosions/fire!

If there is any residual 

material left in the fluff filter, 

this may ignite when drying 

is in progress, or even cause 

the appliance to catch fire or 

explode.

Clean the fluff filter regularly.

Risk of explosions/fire!

Certain objects may ignite 

when drying is in progress, 

or even cause the appliance 

to catch fire or explode.

Remove any lighters or 

matches from pockets on 

items of clothing.

Risk of explosions/fire!

If there is coal dust or flour in 

the air around the appliance, 

this may cause an explosion.

Make sure that the area 

around the appliance is kept 

clean when it is in operation.

:

Warning

Risk of fire/material damage/

damage to the appliance!

If a program is terminated 

before the drying cycle has 

finished, this prevents the 

laundry from cooling down 

sufficiently and may cause the 

laundry to ignite, or may result 

in material damage or damage 

to the appliance.

During the last part of the 

drying cycle, the laundry in 

the drum is not heated 

(cooling cycle). This is to 

ensure that it remains at a 

temperature at which it will 

not be damaged.

Do not switch off the 

appliance before the drying 

cycle has finished unless you 

remove all items of laundry 

from the drum immediately 

and spread them out (to 

dissipate the heat).

Summary of Contents for WTY87640WW













































Reviews: