manualshive.com logo in svg

Bosch WTX88M20AU, Installation And Operating Instructions Manual, Page: 42 / 56

Share
Download
Bosch WTX88M20AU Installation And Operating Instructions Manual Download Page 42

en

    Appliance care

42

Ö

Appliance care

Appliance care

The appliance offers the following 

settings for the appliance care 
programme:

You can use the appliance 
setting 

Ð

Quick Care

  to call up and run 

the basic appliance care programme. 
This is an additional cleaning 
programme to remove any light dirt 
deposits in the appliance.

You can use the appliance setting 

Ð

In-

depth Care

  to call up and run the 

intensive appliance care programme. 
This is an additional cleaning 
programme to remove any stubborn dirt 
in the appliance and any odours after a 
downtime of more than one month.

Before running the appliance care 
programme, the appliance must be 
suitably prepared.

:

Warning

Risk of scalding/material damage/
damage to the appliance!

Boiling or hot water can cause severe 
scalding as well as material damage 
and damage to the appliance if it is 
spilled or leaks out.
Do not use boiling water for this 
appliance or its components or 
accessories. Do not allow hot water or 
steam to come into contact with your 
skin.

:

Warning

Risk of poisoning/material damage!

Condensation water is not suitable for 
drinking and may be contaminated with 
lint. Contaminated condensation water 
may be hazardous to health and may 
cause material damage.
Do not drink or reuse.

Preparing the appliance for 
appliance care

The appliance must be prepared 

before

 

you can run a basic or intensive 
appliance care programme.

Prepare the appliance for appliance 
care as follows:

1.

Remove the laundry.

2.

Clean the fluff filter.

~

 Page 31

3.

Close the appliance door.

4.

Pull out the condensation container 
horizontally and empty it.

Summary of Contents for WTX88M20AU

























































Reviews:

No comments