background image

Operating the appliance       

en

27

5.

Close the appliance door.

Caution!

Risk of material damage to the 

appliance or laundry.

Make sure that laundry is not 

trapped in the door.

Note:  

The appliance's drum is lit up 

after the door is opened and closed and 

once the programme has started. The 

drum's interior light goes out on its own.

Setting a programme

Note:  

If you have activated the 

childproof lock, you must deactivate it 

before you can set a programme. 

~

 Page 30

1.

Set the programme you require.

The programme settings will appear 

on the display.

2.

Adjust the programme settings, if 

required.

Starting the programme

Press 

Έναρξη

A

 

Προσθήκη

 

ρούχων

 

 (Start/Reload).

Note:  

If you want to prevent the 

programme from being adjusted 

inadvertently, activate the childproof 

lock. 

~

 Page 30

Programme progress

The programme status will be indicated 

on the display.

Note:  

When a programme is selected, 

the expected drying time for the 

maximum permitted load is displayed. 

The moisture sensor measures the 

residual moisture in the laundry as it is 

being dried. The programme duration 

and the remaining time indicated on the 

display are automatically adjusted as 

the programme progresses, depending 

on how damp the laundry is (exception: 

Timed programmes).

Changing the programme or 

adding more laundry

You can remove or add laundry and 

change or adjust the programme at any 

time during drying.

1.

Open the door or press 

Έναρξη

/

 

A

 

Προσθήκη

 

ρούχων

 

 (Start/

Reload) to pause the programme.

Note:  

The drum will continue to 

rotate when the CoolDown process 

is in progress, even if you have 

paused the programme. You can 

stop the CoolDown process at any 

time by opening the door.

2.

Add or remove laundry.

Summary of Contents for WTX87MW9GR





















































Reviews: