Home Connect
en
39
Updating the software
You can update the Home Connect
software on your appliance. As soon as
a new software update is available, a
note appears in the display:
—˜š
Install the update directly via the
message in the display
or
manually
as
follows:
Ensure that you are in the Home
Connect menu.
1.
Set the programme to position 6.
—˜š
(update) appears in the display.
Start/
A
Pause flashes if a software
update is available.
2.
Press
Start/
A
Reload
.
¢“à
appears in the display.
3.
Press
Start/
A
Reload
.
Note:
The software update may take
several minutes. Do not switch the
appliance off while updates are being
installed.
Energy management
You can connect your appliance to your
smart energy system (Energy manager).
Once you have connected your
appliance to the smart energy system
(Energy manager) and activated the
function, you will be able to optimise
your energy consumption because your
appliance will not start up until your
home photovoltaic system can provide
sufficient energy or the energy tariff is
good.
Further information and system
requirements for using the Energy
manager can be found at:
www.home-
connect.com/energymanagement
Notes
■
The smart energy system (Energy
manager) must use the EEBus
initiative communications standard.
■
Before you start, read the smart
energy system instruction manual to
find out how to connect your
appliance to the smart energy
system (Energy manager).
1.
Set the programme to position 7.
“Ÿ®
(Energy manager) appears in
the display.
2.
Press
Start/
A
Reload
.
Your appliance now attempts to
connect to the smart energy system
(energy manager). If the appliance
has connected successfully,
™©Ÿ
appears in the display.
3.
Activate Flexstart if you want the
smart energy system (Energy
manager) to start up your appliance.
Activate the function to allow your smart
energy system (Energy manager) to
start your appliance once your home
photovoltaic system is able to provide
sufficient energy or the energy tariff is
good.
Note:
Your smart energy system
(Energy manager) cannot start your
appliance until it is connected to the
appliance.
#
+
3
;
#
+
3
;
