Bosch WTX80KM9SN, User Manual And Installation Instructions

Page: 50 / 60

en
Troubleshooting
50
Fault Cause and troubleshooting
The drying time is too
long.
▶
Ventilate the appliance's installation location.
Insufficient condensation for the automatic self-clean-
ing when permanently drying small loads of laundry.
▶
Regularly dry a load weighing more than 3 kg of
damp laundry until the programme ends.
Insufficient condensation for the automatic self-clean-
ing when permanently using the crease-removal func-
tion.
▶
Regularly dry a load weighing more than 3 kg of
damp laundry until the programme ends.
The appliance's ventilation opening is blocked.
▶
Ensure that the ventilation opening of the appliance
is kept clear.
Heat exchanger is soiled.
▶
→ "Running the basic appliance care programme
on the appliance", Page 38
The base unit filter is damp.
1.
→ "Cleaning the filter system on the base unit",
Page 29 .
2.
Dry the filter thoroughly after cleaning.
3.
→ "Closing the base unit", Page 43 .
4.
→ "Switching off the appliance", Page 29 .
5.
→ "Switching on the appliance", Page 28 .
6.
→ "Starting the programme", Page 29 .
"Ready in" time is activated and the ambient temperat-
ure is lower than 16 °C.
▶
Ensure that the ambient temperature is above 16
°C or start the next drying process within 2 hours.
→
" Technical data", Page 56
Remote start is activated and the ambient temperature
is lower than 16 °C.
▶
Ensure that the ambient temperature is above 16
°C or start the next drying process within 2 hours.
→
" Technical data", Page 56