en
Home Connect
34
■
You cannot make changes in the
Home Connect app while the
appliance is in operation. You will be
able to use the Home Connect app
to see any adjustments made
directly on the appliance itself,
however.
Connecting to your home
network automatically
If your router has a WPS function, you
can connect the appliance to your home
network automatically.
If your router does not have a WPS
function, you will need to connect the
appliance to your home network
manually.
Wi-Fi must be switched on at the
appliance.
1.
Switch on the appliance.
2.
Press and hold
Remote Start
}
for
at least 3 seconds.
‘ž£
(connect automatically) will
appear on the display.
3.
Press Start/Pause
A
to connect to
the network.
|
will flash on the
display.
The appliance will now try to connect to
your home network.
4.
Activate the WPS function on your
home network router within the next
2 minutes.
If the appliance has connected to your
home network successfully,
’©Ÿ
(connected) will appear on the display
and
|
will be lit continuously.
5.
Press
Remote Start
}
briefly to exit
the Home Connect settings.
Note:
If a connection could not be
established,
“§§
(fault) will appear on
the display. Check whether your
appliance is in range of your home
network. Try connecting automatically
again or connect your appliance
manually.
Connecting to your home
network manually
If your appliance has already been
automatically connected to your home
network, you can skip the manual
connection step.
If your router does not have a WPS
function, you will need to connect the
appliance to your home network
manually.
Wi-Fi must be switched on at the
appliance.
1.
Switch on the appliance.
2.
Press and hold
Remote Start
}
for
at least 3 seconds.
‘ž£
(connect automatically) will
appear on the display.
