manualshive.com logo in svg

Bosch WTW875L8SN, Installation And Operating Instructions Manual, Page: 35 / 44

Share
Download
Bosch WTW875L8SN Installation And Operating Instructions Manual Download Page 35

Information on the display       

en

35

Y

Information on the display

Information on the display

--------

Note:  

If you cannot rectify the fault yourself by turning the appliance off and then on 

again, please contact our after-sales service.

~

 Page 41

Faults

Cause/remedy

ð

 on the display and 

drying has stopped.

■

Empty the condensation container and reinsert it.

~

 Page 30

Press (Start/Pause) 

A

.

■

Once you have installed the optional drain hose*, make sure that it:

Is correctly connected 

Is free of kinks

Is not blocked or clogged, e.g. with deposits

é

 on the display.

Remove the fluff.

~

 Page 31

Press (Start/Pause) 

A

.

’

 on the display.

Not a fault. The heat exchanger is being cleaned automatically. Do not pull out 

the condensation container while this is displayed.

The display goes out and 

(Start/Pause) 

A

 

flashes.

Not a fault. Energy saving mode is active .

* Depending on how the appliance is equipped or the available accessory

Summary of Contents for WTW875L8SN













































Reviews:

No comments