manualshive.com logo in svg

Bosch WTW875L8SN, Installation And Operating Instructions Manual, Page: 30 / 44

Share
Download
Bosch WTW875L8SN Installation And Operating Instructions Manual Download Page 30

en

    Operating the appliance

30

Emptying the condensation 

container

Note:  

After each drying cycle, empty 

the condensate container; otherwise 

the next drying programme may be 

cancelled as a result of the condensate 

container being full.

1.

Pull out the condensation container 

horizontally.

2.

Pour out the condensation water.

Caution!

Risk of harm to health and material 

damage

Condensation water is not suitable 

for drinking and may be 

contaminated with fluff. 

Contaminated condensation water 

may be harmful to your health and 

cause material damage. Do not drink 

the condensation water or reuse it.

3.

Push the condensation container 

back into the appliance until you feel 

it lock into place.

Note:  

The filter in the condensation 

container filters the condensation water, 

which is used during the appliance's 

automatic cleaning cycle. The filter is 

cleaned by emptying out the 

condensation water. You should still 

check the filter regularly for any build-

up, and remove this if necessary. 

~

 "Cleaning the filter in the 

condensation container" on page 34

Summary of Contents for WTW875L8SN













































Reviews:

No comments