Bosch WTW875L8SN, Installation And Operating Instructions Manual, Page: 25 / 44

Programme settings
en
25
--------
(Ready in)
ñ
‚
-
ƒ…
Before starting the programme , you can preselect the pro-
gramme end time ("Ready in" time) in hourly increments (h =
hour), up to a maximum of 24 hours:
1. Select a programme.
The programme duration will be displayed for the selected
programme, e.g.
‚
:
…†
(hours:minutes).
2. Press (Ready in)
ñ
repeatedly until the required number
of hours is displayed.
Note:
Use the
(Ready in)
ñ
+
button to increase the set-
ting values, and the
(Ready in)
ñ
–
button to reduce them.
3.
Press
(Start/Pause)
A
.
This activates the time delay.
Before the programme starts, the selected number of
hours (e.g.
‰
) is shown on the display and counts down
until the drying programme starts. The duration of the pro-
gramme will then be displayed.
Note:
The programme duration is included in the "Ready in"
time.
E.g.
\ ‹
:
…‹
The drying time for timed programmes can be extended to up
to 3 hours 30 minutes in 10-minute increments.