manualshive.com logo in svg

Bosch WTW8758LSN, Installation And Operating Instructions Manual

Share
Download
Bosch WTW8758LSN Installation And Operating Instructions Manual Download Page 38

en

    Information on the display

38

Y

Information on the display

Information on the display

--------

Note: 

If you cannot rectify the fault yourself by turning the appliance off and then on again, 

please contact our after-sales service.

~

 Page 45

Faults

Cause/remedy

ð

 on the display and 

drying has stopped.

■

Empty the condensation container and reinsert it.

~

 Page 30

Press (Start/Pause) 

A

.

■

Once you have installed the optional drain hose*, make sure that it:

Is correctly connected 

~

 Page 32

Is free of kinks

Is not blocked or clogged, e.g. with deposits

é

 on the display.

Remove the fluff.

~

 Page 31

Press (Start/Pause) 

A

.

ó

 on the display.

Not a fault. The heat exchanger is being cleaned automatically. Do not pull out 

the condensation container while this is displayed.

The display goes out and 

(Start/Pause) 

A

 

flashes.

Not a fault. Energy saving mode is active .

* Depending on how the appliance is equipped or the available accessory

Summary of Contents for WTW8758LSN

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands