a
a
a
a
a
1.
Take all accessory parts out
2.
a
ʠ
ʠ
F
+
+
ʠ
a
12
What to do if...
If you cannot rectify a fault yourself, please contact our after-sales service. We will always find
an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can
be found in the enclosed after-sales service directory, or by calling one of these numbers:
–
GB
0844 8928979
(Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
–
IE
01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see under the loading door).
Turn the programme selector to
0 (Off)
and unplug the mains plug from the socket.
ʠ
The
(start)
indicator lamp
does not light up.
Mains plug plugged in?
Programme selected?
ʠ
The
n
(Container)
indicator
lamp and the
(start)
button
are flashing.
Empty the condensation container
a
page 4
.
Clean the condensation container filter if necessary
a
page 9
.
Dryer transported?
a
Wait 2 hours and start again.
ʠ
The
.
(Filter)
indicator lamp and
(start)
button are flashing.
Rinse the fluff filter under running water
a
page 4
.
ʠ
Cln
appears in the display panel. Not an error. Automatic cleaning of the heat exchanger. Do
not empty the condensation container.
ʠ
Dryer does not start.
(start)
button selected?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
ʠ
Water is leaking out.
Make sure the dryer is level.
ʠ
The door opens by itself.
Push the door closed until you hear it click into place.
ʠ
The required degree of dryness
was not achieved or the drying
time was too long.
Rinse the fluff filters under running water
a
page 4.
Empty the condensation container.
Check the water drainage (if applicable).
Ambient temperature greater than 35 °C?
a
Ventilate the
room.
Air inlet may be blocked
a
Keep clear.
Was an unsuitable programme selected?
a
page 7.
Has the dryer been installed with sufficient space on all
sides? Ensure that air can circulate.
Power failure
a
Restart dryer.
Fine layer of limescale on the moisture sensors
a
Clean
the sensors
a
page 6
.
ʠ
Laundry damp.
Select the next drying programme up or use the Timed
programme as a supplement
a
page 7.
Warm laundry feels damper than it really is.
ʠ
The humidity in the room
increases significantly.
Make sure the room is sufficiently ventilated.
Air inlet blocked?
a
Keep clear.
ʠ
Power failure.
Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate.
ʠ
Other intermittent noises and
vibrations.
Not an error.
Normal noises
a
page 11
.
ʠ
Loud humming noise for several
seconds.
Has the condensation container been properly inserted?
a
Push the condensation container all the way in.
Not an error. Normal noises
a
page 11
.
ʠ
The interior light is not working
(depending on model)
.
Pull out the appliance plug, remove the cover cap in the
interior above the door (use Torx 20 screwdriver) and
replace the bulb
a
page 10
. Close the cover cap. Never
operate the dryer without a cover cap.
13
Safety instructions
Emergency
– Pull the appliance plug out of the socket immediately or disconnect the fuse.
ONLY use the
dryer...
– In rooms inside the house.
– To dry fabrics.
The dryer must
NEVER...
– Be used for purposes other than those described above.
– Be modified in terms of its technology or properties.
Hazards
– The dryer must not be used by children or persons who have not been
instructed in its use.
– Do not leave children unsupervised near the dryer.
– Keep pets away from the dryer.
– Remove all objects from pockets, and lighters in particular
a
Risk of
explosion.
– Do not lean or sit on the door
a
Risk of tipping.
Installation
– Secure loose cables
a
Risk of tripping.
– Do not operate a dryer if there is a risk of frost.
Mains
connection
– Connect the dryer to an AC earthed socket according to specifications,
otherwise it cannot be guaranteed that the appliance is completely safe.
– The cable cross-section must be sufficient.
– Only use earth-leakage circuit breakers with the following symbol:
– The appliance plug and socket must be compatible.
– Do not use multiple plugs/connectors and/or extension cables.
– Do not touch or hold the appliance plug with wet hands
a
Risk of electric shock.
– Never pull the appliance plug out of the socket by its cable.
– Do not damage the mains lead
a
Risk of electric shock.
Operation
– Only load the drum with laundry.
Check the contents before you switch the dryer on.
– Do not use the dryer if the laundry has been in contact with solvents, oil, wax,
grease or paint (e.g. hair styling products, nail varnish remover, stain
remover, cleaning solvent, etc.)
a
Risk of fire/explosion.
– Dust (e.g. coal dust, flour) poses a danger: Do not use the dryer
a
Risk of explosion
– Do not put laundry containing foamed material/rubber in the dryer
a
elastic
material may be destroyed and the dryer be damaged due to possible
deformation of the foamed material.
– When cleaning the fluff filter, make sure that no foreign material (down or
filling material) gets into the air duct opening. If necessary, clean the drum
beforehand with a vacuum cleaner. If foreign material should still get into the
air duct
a
call the after-sales service
a
Risk of fire/explosion.
– Switch off the dryer once the programme has ended.
– The water from condensation is not drinking water and may be contaminated
with fluff.
Defect
– Do not use the dryer if it is defective or if you suspect that it is.
Repairs must only be carried out by the after-sales service.
– Do not use the dryer if the mains cable is defective. To avoid danger, only
have the defective mains cable replaced by the after-sales service.
– Always pull the mains plug out of the socket before changing the bulb for
the interior light
a
Risk of electric shock.
Spare parts
– Only use genuine spare parts and accessories for safety reasons.
Disposal
– Pull out the appliance plug,
then
cut off the mains cable from the appliance.
Dispose of at a municipal waste disposal facility.
– Heat exchangers contain a fluorinated greenhouse gas covered by the
Kyoto protocol (R134a)
a
dispose of in a proper manner. Capacity: 0.22
kg.
– Packaging: Keep all packaging out of reach of babies and children
a
Risk of suffocation.
– All materials are environmentally sound and can be reused.
Dispose of in an environmentally-responsible manner.
