Bosch WTU876BHSC, User Manual

Page: 30 / 56

en
operation
30
12.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡
A programme is set.
→
"Setting a programme", Page 29
¡
The programme settings have
been adjusted.
→
"Adjusting the programme set-
tings", Page 29
▶
Press and hold ⁠ for approx. 3
seconds.
Press ⁠ to call up the saved pro-
gramme.
Note:
To overwrite the saved pro-
gramme, repeat the steps above.
12.5 Loading laundry
Note:
To prevent creasing, note the
maximum load for the programmes.
→
"Programmes", Page 25
Requirements
¡
The laundry is prepared and sor-
ted.
→
"Laundry", Page 29
¡
The drum is empty.
1.
Open the door.
2.
Place the laundry in the drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
12.6 Starting the programme
Requirement:
A programme is set.
→ "Setting a programme", Page 29
▶
Press .
a
The display shows the programme
duration or the "Ready in" time.
a
After the programme has ended,
the display shows: "End".
Note:
If "Hot" appears, the appliance
cools the laundry.
When "Hot" goes out, the laundry has
cooled down.
12.7 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Requirement:
A programme has
started.
→
"Starting the programme",
Page 30
1.
Press .
The cooling process starts auto-
matically after approximately 30
seconds and cools down the laun-
dry while the drum is rotating. If
you want to avoid or cancel the
cooling process, open the door.
→
"Display", Page 20
2.
Open the door.
3.
Add or remove laundry.
4.
Close the door.
5.
Press .
12.8 Cancelling the pro-
gramme
1.
Press .
2.
Open the appliance door.
3.
Remove the laundry.
→
"Unloading the laundry",
Page 30
12.9 Unloading the laundry
1.
Open the door.
2.
Remove the laundry from the
drum.
12.10 Switching off the appli-
ance
▶
Press .