Cleaning and maintenance
en
35
:
Warning
Risk of injury!
You could cut your hands on the sharp
fins on the heat exchanger.
Do not touch the fins on the heat
exchanger with your hands.
Note:
Allow the appliance to cool down
for approximately 30 minutes after use
before commencing cleaning.
Clean the base unit as follows:
1.
2.
Open the maintenance flap by the
handle.
3.
Clean the maintenance flap with a
soft, damp cloth.
4.
Unlock the levers on the heat
exchanger cover.
5.
Pull the heat exchanger cover out by
its grip.
6.
Carefully remove the filter mat from
the heat exchanger cover.
Note:
Take care not to damage the
filter mat when doing this.
7.
Use a soft brush to clean the heat
exchanger cover.
Note:
Make sure that no dirt or
debris is left on the seal.