background image

en 

Transportation, storage and disposal

44

17 Transportation, stor-

age and disposal

17.1 Preparing the appliance

for transportation

ATTENTION!

If the appliance is operated immedi-
ately after transportation, the refriger-
ant contained in the appliance may
result in damage to the appliance.

Immediately after transporting the
appliance, leave it to rest for two
hours before putting it into opera-
tion.

Tip: 

The appliance may contain re-

sidual water, which may drip out of it
when transported. The appliance
should be transported upright.

Requirements

¡

The condensation container is
emptied. Emptying the condensa-
tion container → 

Page 32

¡

The appliance has been switched
on. 
→ 

"Switching on the appliance",

Page 27

1.

Set any programme → 

Page 27

.

2.

Start the programme → 

Page 28

and wait 5 minutes.

a

The condensation is drained.

3.

Switch off the appliance. 
→ 

"Switching off the appliance",

Page 29

4.

Remove the water drain hose from
the connection point. 
→ 

"Water outlet connection types",

Page 16

5.

Secure the water drain hose on the
appliance against unintentional
loosening.
Ensure that you do not bend the
water drain hose.

6.

Empty the condensation container
→ 

Page 32

.

7.

Insert the condensation container
→ 

Page 32

.

8.

Disconnect the appliance's mains
plug from the power supply.

a

The appliance is now ready to be
transported.

17.2 Disposing of old appli-

ance

Valuable raw materials can be re-
used by recycling.

WARNING

Risk of harm to health!

Children can lock themselves in the
appliance, thereby putting their lives
at risk.

Do not install the appliance behind
a door as this may obstruct the ap-
pliance door or prevent it from
opening.

With redundant appliances, unplug
the power cord. Then cut through
the cord and damage the lock on
the appliance door beyond repair
so that the appliance door will no
longer close.

WARNING

Risk of fire!

The refrigerant R290 used in this ap-
pliance is environmentally friendly. It
is however flammable and may ignite
if appliances are not disposed of
properly.

Dispose of the appliance properly.

Do not damage the tubing of the
refrigerant circuit.

1.

Unplug the appliance from the
mains.

2.

Cut through the power cord.

3.

Dispose of the appliance in an en-
vironmentally friendly manner.

Summary of Contents for WTH85VH3

















































Reviews: