background image

Installation and connection       

en

15

During installation ensure that:

The dryer is placed on a clean, level 

and firm surface,

The mains plug can be accessed at 

all times,

The air inlet on the dryer is kept clear 

and there is sufficient ventilation,

The area around the dryer is kept 

clean and

The dryer is levelled using the 

threaded feet.

Note:  

Check the alignment of the 

appliance with a spirit level and 

correct if necessary. Change the 

height by turning the appliance feet.

All appliance feet must stand firmly 

on the ground.

Incorrect alignment may cause high 

noise levels, vibrations and improper 

movement of the drum.

Note:  

If in doubt, have the appliance 

connected by a specialist.

Optional accessories

Order optional accessories

*

 from 

the after-sales service:

Washer-dryer stack connection set:

To save space, the dryer can be 

placed on top of a suitable washing 

machine of the same width and 

depth. 

The dryer must be fastened to 

the washing machine using this 

connection set. 

Order number with pull-out worktop: 

WTZ11400

Order number without pull-out 

worktop: 

WTZ20410

.

Platform:

For easier loading and unloading, 

raise your dryer with a platform.

Transport laundry with the clothes 

basket integrated into the platform 

drawer.

Order number: 

WMZ20500

.

Basket for woollens:

Dry individual woollen items, sports 

shoes and soft toys in the basket for 

woollens.

Order number: 

WMZ20600

.

* Depending on the model

Summary of Contents for WTH85270BY









































Reviews: