en
Signal setting
28
M
Signal setting
Signal setting
You can change the following settings:
■
The speed at which the washing
machine was spun; only used if the
anticipated drying time needs to be
displayed more accurately,
■
The volume of the audible signal at
the end of the programme,
■
The volume of the audible button
signals.
You will need to activate the setting
mode in order to change these settings.
Activating setting mode
1.
Switch the dryer on.
2.
Select the "Cottons" programme in
position 1 and wait for 5 seconds.
Setting mode is now activated. The
symbols go out on the display panel
and the programme duration is
displayed.
1.
Press and hold the Start button and,
at the same time, turn the
programme selector clockwise to
position 2.
2.
The
spin speed
is shown on the
display.
3.
Press the "Ready in" time button to
change the spin speed.
4.
Turn the programme selector
clockwise to position 3.
5.
The volume for the
audible signal at
the end of the programme
is shown
on the display.
0 = off, 1 = quiet, 2 = medium,
3 = loud, 4 = very loud
6.
Press the "Ready in" time button to
change the volume.
7.
Turn the programme selector
clockwise to position 4.
8.
The volume for the
audible button
signal
is shown on the display.
0 = off, 1 = quiet, 2 = medium,
3 = loud, 4 = very loud
9.
Press the "Ready in" time button to
change the volume.
Note:
You can select other positions
with the programme selector; however,
you will be unable to change these
settings.
Exiting setting mode
Turn the programme selector to the
"Off" position once you have set the
required spin speed and the volume.
The settings have now been saved.
