c
@
c
c
L
I
F
c
÷
@
c
+
@
+
@
a
+
+
a
a
a
a
1.
2.
3.
3
3
Do not operate the dryer if
9
Technical data
ʠ
Dimensions (DxWxH)
60 x 60 x 85 cm (height adjustable)
Weight
approximately 45 kg
Max. capacity
7 kg
Condensation container
4.2 l
Connection voltage
Connected load
Fuse protection
see appliance rating plate
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
ʠ
Drum interior light
(depending on model)
(bulb E14, 25 W)
The drum lights up after the door is opened or closed, and after the programme starts,
and switches off automatically. Changing the bulb
a
page 10
.
Consumption rates
(The value on the label is achieved at the maximum heat setting.)
Fabrics/programmes
Residual moisture in the
fabrics after spinning
Drying time**
Energy
consumption**
c
Cottons 7 kg
10 A
16 A
10 A
16 A
+
. Cupboard Dry*
1400 rpm
(50%)
112 min
98 min
3.54 kWh
3.54 kWh
1000 rpm
(60%)
131 min
115 min
4.13 kWh
4.13 kWh
800 rpm
(70%)
150 min
133 min
4.72 kWh
4.72 kWh
I
ron Dry*
1400 rpm
(50%)
93 min
69 min
2.55 kWh
2.55 kWh
1000 rpm
(60%)
111 min
82 min
3.22 kWh
3.22 kWh
800 rpm
(70%)
130 min
94 min
3.90 kWh
3.90 kWh
Synthetics 3.5 kg
+
. Cupboard Dry*
800 rpm
(40%)
48 min
42 min
1.35 kWh
1.35 kWh
600 rpm
(50%)
60 min
51 min
1.65 kWh
1.65 kWh
* Programme setting for testing in accordance with applicable standard EN61121.
** The values may differ from those specified, depending on the type of fabric, composition of
laundry to be dried, residual moisture in the fabric and the amount of laundry being loaded.
Fabrics/programmes
Drying time
Annual energy consumption
c
Cottons 7 kg / 3.5 kg
*
+
. Cupboard Dry***
89 min / per cycle
497 kWh / per year
***Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU.
Optional accessories
(from after-sales service using order number)
Platform
For easier loading and unloading. The basket contained in the drawer can be used to carry
the laundry.
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. The dryer
must be
fastened to the washing machine using this connection set.
With pull-out worktop: WTZ 11300
Connection fittings for condensation outlet
The condensation is conveyed directly via a hose.
Installation underneath the worktop
Instead of the appliance covering plate, you
must
have a metal cover fitted by
a specialist.
WMZ
20500
WTZ
11310
WTZ
1110
WTZ
10290
10
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales
service. We will always find an appropriate solution and will avoid unnecessary visits by
engineers. Trust the expertise of the manufacturer and rest assured that the repair will be
carried out by trained service technicians using original spare parts. The contact details of your
local after-sales service can be found in the enclosed
after-sales service
directory, or by
calling one of these numbers:
–
GB
0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
–
IE
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to
0
(Off) and remove the appliance plug from the socket.
ʠ
The
(start)
indicator lamp does
not light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
The display panel light and
indicator lights
(depending on
model)
go out and the
(start)
indicator light flashes.
Energy-saving mode is activated
a
see the separate
Energy-saving mode
instructions.
ʠ
The
n
(Container)
and
(start)
indicator lamp flash.
Empty the condensation container.
If featured, check hose for condensation outlet.
ʠ
The
o
(Filter)
and
(start)
indicator lamp flash.
Clean the fluff filter and/or air cooler under running water
a
Page 4/6
.
ʠ
Dryer does not start.
(start)
button selected?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
ʠ
Water is running out.
Align dryer horizontally.
Clean air cooler seal.
ʠ
The door opens by itself.
Push the door closed until you hear it engage.
ʠ
Creasing.
Laundry load exceeded?
Remove articles of clothing immediately after the end of the
programme, hang up and pull into shape.
Unsuitable programme selected
a
Page 7.
ʠ
Drying result is not satisfactory
(laundry feels too damp).
Warm laundry feels damper than it actually is.
The selected programme does not suit the load. Use another
drying programme or, in addition, select the time programme
a
Page 7.
Use fine adjustment for the drying result
a
Page 1/2 and 5/6.
Fine layer of limescale on the humidity sensors
a
Clean the humidity sensors
a
Page 6
.
Programme termination, e.g. tank full, mains power supply failure,
door open or maximum drying time reached.
ʠ
Drying time too long.
Rinse the fluff filters under running water
a
Page 4.
Insufficient supply of air
a
ensure that air can circulate.
Air inlet possibly blocked
a
Clear inlet
a
Page 8
.
Ambient temperature higher than 35 °C
a
ventilate the room.
ʠ
The humidity in the room
increases significantly.
Make sure the room is sufficiently ventilated.
ʠ
Mains failure.
Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate.
ʠ
One or more indicator lights for
programme status are flashing.
Clean filter and air cooler
a
Page 4/6.
Check installation conditions
a
Page 8.
Switch off, leave to cool down, switch on again, restart
programme.
ʠ
The interior light is not working
(depending on model)
.
Pull out the appliance plug, remove the cover cap in the interior
above the door (use Torx 20 screw driver) and replace the bulb.
Close the cover cap.
Never operate the dryer without a cover cap.
a
a
a
a
a
a
a
a
a
a
