Bosch WTB86201UC Use And Care Manual Download Page 32

32

STATEMENT OF LIMITED PRODUCT WARRANTY

Bosch Clothes Dryer

What this Warranty Covers & Who it Applies to:

 

The limited warranty provided by BSH Home Appliances 

Corporation (Bosch) in this Statement of Limited Product 

Warranty applies only to the Bosch Clothes Dryer 

("Product") sold to you, the first using purchaser, but 

strictly conditioned on the Product having been 

purchased: (1) for your normal, household (non-

commercial) use, and has in fact at all times only been 

used for normal household purposes (any commercial 

use or setting of the Product automatically voids the 

warranty); (2) new at retail (not a display, "as is", or 

previously returned model) purchased directly by the 

end-user consumer, and not for resale, or commercial 

use; and (3) within the United States or Canada, and has 

at all times remained within the country of original 

purchase. The warranties stated herein apply only to the 

first purchaser of the Product and are not transferable. 

Bosch reserves the right to request proof of purchase at 

the time any warranty claim is submitted to confirm that 

the Product falls within the scope of this limited product 

warranty. The warranty is automatically void if the Product 

was a display model, sold "as is", tampered with, a 

damaged or "scratch and dent" model, or a previously 

returned model, a free give-away, charitable donation or 

contest prize. 

Limitation for Third Party Accessories:

 

Third party accessories, other than those shipped with 

your Bosch appliance, and any consequential damages 

resulting there from, are not covered by this warranty. 

This limitation expressly includes the implied warranties 

of merchantability and fitness for a particular purpose, 

which are also expressly excluded with respect to third 

party accessories, other than those shipped with your 

Bosch appliance. Use of third party accessories, other 

than those shipped with your Bosch appliance, does not 

void this warranty on any other part, and all other 

provisions of this warranty remain in effect. 

Please make sure to return your registration card; while 

not necessary to effectuate warranty coverage, it is the 

best way for Bosch to notify you in the unlikely event of a 

safety notice or product recall. 

How Long the Warranty Lasts:

 

Bosch warrants that the Product is free from defects in 

materials and workmanship for a period of three hundred 

sixty-five days (365) days from the date of purchase. The 

foregoing timeline begins to run upon the date of 

purchase, and shall not be stalled, tolled, extended, or 

suspended, for any reason whatsoever. 

Repair/Replace as Your Exclusive Remedy:

 

During this warranty period, Bosch or one of its 

authorized service providers will repair your Product 

without charge to you (subject to certain limitations 

stated herein) if your Product proves to have been 

manufactured with a defect in materials or workmanship. 

If reasonable attempts to repair the Product have been 

made without success, then Bosch will replace your 

Product (upgraded models may be available to you, in 

Bosch's sole discretion, for an additional charge). All 

removed parts and components shall become the 

property of Bosch at its sole option. All replaced and/or 

repaired parts shall assume the identity of the original 

part for purposes of this warranty and this warranty shall 

not be extended with respect to such parts. Bosch's sole 

liability and responsibility hereunder is to repair 

manufacturer-defective Product only, using a Bosch-

authorized service provider during normal business 

hours. For safety and property damage concerns, Bosch 

highly recommends that you do not attempt to repair the 

Product yourself, or use an un-authorized servicer; Bosch 

will have no responsibility or liability for repairs or work 

performed by a non-authorized servicer. If you choose to 

have someone other than an authorized service provider 

work on your Product, THIS WARRANTY WILL 

AUTOMATICALLY BECOME NULL AND VOID. Authorized 

service providers are those persons or companies that 

have been specially trained on Bosch products, and who 

possess, in Bosch's opinion, a superior reputation for 

customer service and technical ability (note that they are 

independent entities and are not agents, partners, 

affiliates or representatives of Bosch). Notwithstanding 

the foregoing, Bosch will not incur any liability, or have 

responsibility, for the Product if it is located in a remote 

area (more than 100 miles from an authorized service 

provider) or is reasonably inaccessible, hazardous, 

threatening, or treacherous locale, surroundings, or 

environment; in any such event, if you request, Bosch 

would still pay for labor and parts and ship the parts to 

One or more indicator 

lights are flashing.

Lint filter or/and heat exchanger is 

dirty.

Clean lint filter or/and heat exchanger (see solution of 

the problem(s) in this table above).

Installation conditions are not fine.

Check the installation conditions. 

~

 Electrical Connections; Page 13

Fault in program sequence or mal-

function.

Switch off the dryer, allow it to cool down, switch back 

on and restart the program.

Power failure.

Remove laundry from the dryer immediately and 

spread out. This allows the heat to dissipate. Be care-

ful as the door, the drum and the laundry may be hot.

Problem

Possible cause(s)

Solution(s) 

Summary of Contents for WTB86201UC





































Reviews: