6.8
Belt removal KI01
6.9
Belt Tension adjuster
►
Take of the opening cover on the base plate.
►
Put the appliance on the backside.
►
Remove the belt from the belt tension adjuster.
►
Open the opening ion the base plate.
►
Take off work top panel, facia panel, front panel and bearing.
(see dismantling bearing plate.)
►
Take off the belt.
Remove the two screws of the belt tension adjuster at the base plate
and take off belt tension adjusters over the opening in the base plate.
6.8.1 Belt
mounting
►
Draw up the belt over the drum
►
Hang up and bolt bearing plate
►
Stretch the belt with the belt tension adjuster
►
Close the opening on the base
►
Montage of the front panel, facia panel and work top panel.
113_58300000104082_ara_en_h.doc – 19.03.07
Seite 19 von 30
