en
operation
30
1.
Open the door.
Ensure that the drum is empty.
2.
Place the laundry in the drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
12.4 Starting the programme
Requirement:
A programme is set.
"Setting a programme", Page 29
▶
Press
Start/
Reload
.
a
The display shows the programme
duration or the "Ready in" time.
a
After the programme has ended,
the display shows: "End".
Note:
If "Hot" appears, the appliance
cools the laundry.
When "Hot" goes out, the laundry has
cooled down.
12.5 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Requirement:
A programme has
started.
→
1.
Press
Start/
Reload
.
The cooling process starts auto-
matically after approximately 30
seconds and cools down the laun-
dry while the drum is rotating. If
you want to avoid or cancel the
cooling process, open the door.
→
2.
Open the door.
3.
Add or remove laundry.
4.
Close the door.
5.
Press
Start/
Reload
.
12.6 Cancelling the pro-
gramme
1.
Press
Start/
Reload
.
2.
Open the appliance door.
3.
Remove the laundry.
→
12.7 Unloading the laundry
1.
Open the door.
2.
Remove the laundry from the
drum.
12.8 Switching off the appli-
ance
▶
Turn the programme selector to .
12.9 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Note:
If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Requirements
¡
The display shows the following
after drying: "End"
¡
or during operation: .
1.
Open the door.
Summary of Contents for WQG242AISN
Page 51: ......
