Bosch WQG242AASN, User Manual And Installation Instructions

Page: 33 / 52

operation
en
33
4.
Use a soft brush to clean the heat
exchanger cover.
Make sure that you remove all dirt
from the seal.
5.
Clean the filter mat thoroughly un-
der warm, running water and
squeeze it out by hand.
You can remove heavy soiling
carefully using a vacuum cleaner.
Do not clean the filter mat using
cleaning products.
6.
Push the filter mat onto the retain-
ers.
Ensure that the cleaned filter mat
is not deformed, damaged or in-
verted when you push it onto the
retainers.
Note:
You can order the filter mat
→ Page 28 as a spare part from
customer service.
7.
Close the base unit → Page 40 .
12.11 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Note:
Operate this appliance using
the water drain hose provided. If you
connect the water drain hose
→
Page 14 , you do not have to regu-
larly empty the condensation con-
tainer →
Page 33 .
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.