background image

en 

Installation and connection

12

Installation and connection

4 Installation and con-

nection

Installation and connection

4.1 Unpacking the appliance

ATTENTION!

Objects remaining in the drum that
are not designed for operation with
the appliance may cause material
damage and damage to the appli-
ance.

Remove these objects, along with
all supplied accessories, from the
drum before starting the appliance.

1.

Remove any packaging and pro-
tective covers completely from the
appliance.
→ 

"Disposing of packaging",

Page 11

.

2.

Check the appliance for visible
damage.

3.

Open the appliance door. 
→ 

"Basic operation", Page 30

4.

Remove any accessories from the
drum.

5.

Close the appliance door.

4.2 Contents of package

After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.

ATTENTION!

If the appliance is operated with in-
complete or defective accessories,
the appliance may not be able to op-
erate properly, or this may result in
material damage or damage to the
appliance.

Do not operate the appliance with
incomplete or defective accessor-
ies.

Replace the accessories in ques-
tion before operating the appli-
ance. 
→ 

"Accessories", Page 29

Note: 

The appliance has been tested

at the factory to check it is in working
order. As a result, water stains may
remain in the appliance. These marks
will disappear after the first wash
cycle.
The delivery consists of the following:

¡

Tumble dryer

¡

Accompanying documents

¡

Transit bolts 
→ 

"Removing the transit bolts",

Page 13

¡

Cover caps

4.3 Requirements for the in-

stallation location

WARNING

Risk of electric shock!

The appliance contains live parts.
Touching live parts is dangerous.

Do not operate the appliance
without a cover cap.

WARNING

Risk of injury!

When using the appliance on a base,
the appliance may tip over.

Always secure the feet of the appli-
ance to a base using the manufac-
turer's fixing brackets → 

Page 29

before using the appliance for the
first time.

ATTENTION!

The appliance may contain residual
water. If you tilt the appliance beyond
40°, this residual water may leak out.

Tilt the appliance carefully.

Summary of Contents for WNA254XSKE





















































Reviews: