en
Operating the appliance
38
■
Be careful when opening the
detergent drawer while the appliance
is running.
Measuring aid A* for liquid detergent
*depending on the model
Position the measuring aid A for
measuring the correct amount of liquid
detergent:
1.
Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2.
Slide the measuring aid forwards,
fold it down and click it into place.
3.
Reinsert the drawer.
Note:
Do not use the measuring aid for
gel detergents and washing powder, or
for programmes with pretreat or when
"Finish in" time is selected.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Starting the programme
Touch and hold
A
(Start/Reload/
Pause)
button for 1~2 seconds, then
release the button. The programme
starts and the appliance door is locked.
The finish-in time is shown in the display
panel and counts down until the
programme starts. After the programme
has started, the programme duration is
displayed. And the symbols for the
programme progress are lighting up.
Childproof lock
You can lock the appliance to prevent
the settings you have set from being
changed inadvertently. To do this,
activate the childproof lock.
To activate the childproof lock:
After the programme starts, Touch and
hold the
(
(SpeedPerfect)
and
ñ
(Finish in/Time Dry)
buttons for 3
seconds. The symbol
E
lights up in the
display panel.
■
E
lights up: The childproof lock is
activated.
■
E
flashes: If the programme and
programme settings are adjusted
while childproof lock is activated.
Note:
When the programme ends,
“Ÿš
is displayed. The door is unlocked.
E
symbol remain on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch and hold the
(
(SpeedPerfect)
and
ñ
(Finish in/Time Dry)
buttons
until the symbol
E
disappears.
