Bosch WM14W460HK Page 42 Instruction Manual And Installation Instructions Download

Page: 42 / 52

Cleaning and maintenance

Cleaning and

maintenance

Cleaning and maintenance

Warning

Danger of death!

There is a risk of electric shock if you

touch live components.

Switch off the appliance and pull out the

mains plug.

Warning

Risk of poisoning!

Toxic vapours can be produced by

cleaning agents that contain solvents,

e.g. cleaning solvent.

Do not use cleaning agents that contain

solvents.

Caution!

Damage to the appliance

Cleaning agents that contain solvents,

e.g. cleaning solvent, can damage

surfaces and components in the

machine.

Do not use cleaning agents that contain

solvents.

Prevent detergent residue from

building up and odours from forming

by following these instructions:

Notes

■

Ensure the room in which the

washing machine is set up is well

ventilated.

■

Leave the door and detergent

dispenser tray open slightly when

the washing machine is not in use.

■

Occasionally run a wash using the

Cottons 60 °C

programme and

powder detergent.

Machine housing/control

panel

■

Wipe the housing and the control

panel with a soft, damp cloth.

■

Remove the detergent residue

immediately.

■

Do not clean with a water jet.

Drum

Use chlorine-free cleaning agents, do

not use steel wool.
If there are odours in the washing

machine, or to clean the drum, run the

Cottons

90 °C

programme without

laundry. Add washing powder.

Descaling

Descaling should not be necessary if

the detergent is measured out correctly.

However, if it is required, follow the

manufacturer's instructions for the

descaling agent. Suitable descalers can

be obtained via our website or from

customer services.

Page 49

Summary of Contents for WM14W460HK





















































Search results

Summary of Contents for WM14W460HK

Reviews:

Related manuals for WM14W460HK

Brands by name

Popular brands

Bosch WM14W460HK, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WM14W460HK

Reviews:

Related manuals for WM14W460HK

Brands by name

Popular brands