en
Additional programme settings
32
During the timer count-down
, you can
add or remove laundry as required:
1.
Press the Start/Reload button.
2.
Open the door and add or remove
laundry.
3.
Close the door.
4.
Press the Start/Reload button.
Note:
The length of the program is
automatically adjusted when the
program is running.
Certain factors can affect the program
length, e.g.:
■
Program settings,
■
Detergent dosage (additional rinse
cycles if required due to foaming),
■
Load size/type of textiles (longer
washing for higher load and for
textiles which absorb more water),
■
Imbalances (e. g. due to fitted
sheets) are offset with several start-
ups of spin cycles,
■
Fluctuations in power supply,
■
Water pressure (infeeding speed).
\
Additional programme
settings
Additional programme settings
Note:
You can find possible additional
programme settings in the overview;
these differ depending on the model.
speed/eco
(
(
speed/
¦
eco)
Button with two possible settings for
adapting the selected programme:
■
G
speed
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more
energy than, the selected
programme, without the speed/eco
setting.
Note:
Do not exceed the maximum
load.
■
¦
eco
Energy-optimised washing by
reducing the temperature while
achieving a washing result that is
consistent with the selected
programme, without the speed/eco
setting.
Select the button to do this. First of all,
you can select the
G
speed
setting. If
you select the button again, the
¦
eco
setting is active. The respective symbol
is shown in the display when the setting
is activated.
If you select the button again, no setting
is active.
Less iron
(
Ø
Less iron)
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.
Note:
The washing's residual moisture
is increased.
