30
4.
Carefully unscrew the pump cover. Clean the interior, pump
cover thread and pump housing (fan impeller in the
detergent-solution pump must rotate).
5.
Reinsert and screw on the pump cover. Handle should be
vertical.
6.
Close service flap.
²
To prevent unused detergent from flowing into the outlet during
the next wash: Pour 1 litre of water into dispenser
II
and start the
0
[
Spin/
Drain
programme: (if only a drained cycle is required:
set rpm (spin speed) to - - -).
Drainage hose on the siphon blocked
1.
Switch off appliance. Remove the mains plug.
Note:
Residual water may run out.
2.
Loosen hose clip, carefully remove drainage hose.
3.
Clean the drain hose and siphon connecting piece.
4.
Reattach the drain hose and secure the connection point
using the hose clamp.
Filter blocked in water inlet hose
First, reduce the water pressure in the supply hose:
1.
Turn off the tap!
2.
Select any programme (except
0
[
Spin
/
Drain
).
3.
Select
A
Start
/Reload. Allow the programme to run for
approx. 40 s.
4.
Turn the programme selector to
Off
. The appliance is
switched off. Pull out the mains plug.
5.
Clean the filter:
&
