31
Filter blocked in water inlet hose
First, reduce the water pressure in the supply hose:
1.
Turn off the tap!
2.
Select any programme (except
0
[
Spin
/
Drain
).
3.
Select
A
Start
/Reload. Allow the programme to run for
approx. 40 s.
4.
Turn the programme selector to
Off
. The appliance is
switched off. Pull out the mains plug.
5.
Clean the filter:
Disconnect the hose from the tap.
Clean the filter with a small brush.
and/or for standard model:
Remove the hose from the rear of the appliance.
Use pliers to remove the filter and then clean it.
6.
Connect the hose and check for leaks.