enSet up and connect
1.
Connect the water inlet hose to the
device.
A notice:Note the pump heights.
The maximum pumping height is 1
The connection
place with one
hose clamp
(24-40 mm)
chern.
bathroom sink
the water
running hose with
a manifold
page 30fix and
secure.
2.
Connect the water inlet hose to the
tap (26.4 mm = 3/4").
plastic pipe
with rubber sleeve
or gully
the water
running hose with
a manifold
page 30fix and
secure.
3.
Open the tap carefully and check
whether the connection points are
tight.
Connection types water drainage
The information will help you to
connect this device to the water drain.
ATTENTION!
When pumping out, the water drain
hose is under pressure and can detach
from the installed connection point.
▶
the water drain hose against
secure eyelets.
accidental L
16
