Bosch WGG244020 Page 5 Instructions For Use And Assembly Download

Page: 5 / 56

securityen

1.4 Secure Installation

When installing the device, observe the safety instructions.

WARNING - DANGER OF ELECTRIC SHOCK!

Improper installations are dangerous.

▶

Only connect and operate the device in accordance with the

information on the type plate.

▶

Connect the equipment to an AC power supply only through a

properly installed, grounded outlet.

▶

The protective conductor system of the electrical house installation must
be installed in accordance with the regulations. The installation must have
a sufficiently large cable cross-section.

▶

When using a residual current circuit breaker, only use a type

with the symbol .

▶

Never supply the device via an external switching device, e.g.

B. timer or remote control.

▶

When the device is installed, the mains plug of the mains

connection cable must be freely accessible, or if free access is not

possible, an all-pole separator must be installed in the

permanently installed electrical installation in accordance with the

installation regulations.

▶

When setting up the device, make sure that the power cord

is not pinched or damaged.

Damaged insulation of the power cord is dangerous.

▶

Never bring the power cord into contact with hot parts of the

device or sources of heat.

▶

Never bring the power cord into contact with sharp points or

edges.

▶

Never kink, crush or modify the power cord.

Summary of Contents for WGG244020

























































Search results

Summary of Contents for WGG244020

Reviews:

Related manuals for WGG244020

Brands by name

Popular brands

Bosch WGG244020, Instructions For Use And Assembly

Search results

Summary of Contents for WGG244020

Reviews:

Related manuals for WGG244020

Brands by name

Popular brands