manualshive.com logo in svg

Bosch WFD50810, Installation And Operating Instructions Manual, Page: 17 / 40

Share
Download
Bosch WFD50810 Installation And Operating Instructions Manual Download Page 17

15

Operating Instructions

4. Press the Start/Pause button. The programme starts.

Ready/Wash indicator light is on.

,,

, ,

3. If required, press the button(s) for additional option(s).
The indicator light of the selected button is on.

, ,

,,

Maximum noise value during washing: 54.9 dB(A).

Changing the programme

Cancelling the programme

If you have accidentally selected the wrong programme:

Turn the programme selector to

off .

Turn the programme selector to the desired programme.
The Ready/Wash indicator light flashes.

If required,changing the other settings,see page 15.

Press the Start/Pause button.
The Ready/Wash indicator light comes on and the new
programme starts.

, ,

, ,

If you wish to prematurely end a programme:

Turn the programme selector to

off .

Turn the programme selector to Spin .
The Ready/Wash indicator light flashes.

Press the Start/Pause button.
The Ready/Wash indicator light stop flashing,the Spin
/End indicator light comes on.

, ,

, ,

, ,

, ,

,,

,,

,,

,,

, ,

,,

,,

, ,

,,

,,

,,

, ,

Summary of Contents for WFD50810









































Reviews:

No comments