operation
en
33
3.
Fold the measuring aid down and
click it into place.
4.
Push in the detergent drawer.
14.8 Adding detergent and
care product
Notes
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡
Observe the information about de-
tergents and care products
→
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
14.9 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
1.
Press
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: End.
2.
If is selected, the laundry is not
spun and the water is drained after
rinsing.
Notes
¡
If the laundry is not removed, the
Anti-Crease programme starts after
15 minutes. The programme takes
around 30 minutes. The display
shows
00:00
and appears.
Press anywhere on the display to
cancel the Anti-Crease programme
and to remove the laundry.
¡
If "Hot" appears, the appliance
cools the laundry.
When "Hot" goes out, the laundry
has cooled down.
14.10 Soaking laundry
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
.
3.
To resume the programme, after
the desired soaking time, press
.
14.11 Adding laundry
1.
Press
.
During the washing cycle, the ap-
pliance pauses.
During the drying cycle, the appli-
ance checks whether it is possible
to add laundry.
Note:
If appears, it is not pos-
sible to add laundry.
When goes out, it is possible to
add laundry.
2.
Open the appliance door.
3.
Add or remove laundry.
4.
Close the appliance door.
