background image

Intelligent dosing system       

en

47

Base dosage

The basic dosages are:

For detergents

 – based on the 

manufacturer’s recommendation for 

average soiling and the respective 

water hardness.

F or fabric softeners

 – based on the 

manufacturer's recommendation for 

a medium level of softness.

Refer to the packaging label on your 

detergent/fabric softener or ask the 

manufacturer directly for this 

information.
To find out the hardness of your water 

supply, use a test strip or check with 

your water supplier.

My water hardness:

Below is an example of detergent 

dosages on a packaging label:

The default setting for the basic dosage 

is set specifically according to the area 

in which you live (e.g. 75 ml for 

detergent and 36 ml for fabric softener). 

Set the basic detergent dosage 

according to the detergent's packaging 

label. Take your water hardness into 

consideration when doing so.
Select the basic fabric softener dosage 

according to how soft you would like 

your laundry to be. 
Changing one basic dosage affects all 

three dosage quantities in the same 

way.

Notes

Reduce the basic dosage if using a 

very concentrated detergent.

If large amounts of foam are 

repeatedly created during washing, 

please check your basic dosage and 

dosage quantity settings.

Certain types of liquid detergent can 

also create excessive amounts of 

foam. If your basic dosage and 

dosage quantity settings are correct, 

we advise you to use a different 

detergent.

Changing the basic dosages:

Appliance settings 

~

 Page 54

Dispenser content for 

i-DOS 

i

I

w

Instead of fabric softener, a second 

liquid detergent can be used in the i-

DOS 

i

I

w

 dispenser.

Notes

When switching the i-DOS 

i

I

w

 

dispenser content from 

fabric 

softener to detergent

, the basic 

dosage for detergent is set to factory 

settings for this dispenser and the 

dosage for this detergent is set to 

Off

 for all programmes in which 

intelligent dosing can be used. Then 

use the i-DOS button in the display 

panel to select the detergent dosage 

(low, medium or high). 

Degree of 

soiling 

Water 

hardness 

light

normal

heavy

very heavy

soft/medium

55 ml

75 ml

120 

ml

160 

ml

hard/very hard 75 ml

95 ml

150 

ml

180 

ml

Summary of Contents for WAY288H9GR





































































Reviews: