Bosch WAY28849II, Instruction Manual And Installation Instructions

Page: 23 / 56

Programme default settings
en
23
The maximum speed that can be set
depends on the model and programme
that has been selected.
Setting 0
: No spin cycles, the water is
only drained. The laundry stays wet
inside the drum, e.g. for items that
should not be spun.
Ready in
(Fine fra)
The programme duration is shown after
selecting the programme.
Before starting the programme
, you
can preselect the programme end in
hourly increments (h = hour) up to a
maximum of 24 hours.
After starting the programme
, the
selected number of hours
e.g. 8 h
is
shown on the display panel and counts
down until the wash programme starts.
The duration of the programme is then
displayed.
Note:
The programme duration is
automatically adjusted when the
programme is running. Changes to the
programme default settings or
programme settings, options, foam
detection function, unbalanced load
detection, the load or soiling may also
change the programme duration.
After starting the programme
, you can
change the preselected number of
hours as follows:
1.
Press the
A
button.
2.
Use the
Ready in
button to change
the number of hours.
3.
Press the
A
button.
After starting the programme
, while the
programme is running, you can add or
remove laundry if necessary.
~
Page 29
i-DOS settings
Your washing machine has an intelligent
dosing system for liquid detergent and
fabric softener (or detergent when using
the setting
Dispenser content:
Detergent
~
Page 34 )
For the majority of programmes on your
washing machine, detergent and fabric
softener are dosed automatically.
The i-DOS settings are not retained
when the appliance is switched off.
The following have been preset at the
factory:
■
i-DOS
w
:
¨
Detergent dosage for lightly soiled
laundry
■
i-DOS
i
I
w
:
©
Fabric softener dosage for a medium
level of softness
i-DOS
w
for detergent
Dosage strengths
You can change the settings for
automatic detergent dosage before the
programme starts. You can find
information on degrees of soiling on
~
Page 15
i-DOS
i
for fabric softener
Dosage strengths
Depending on what stage the
programme is in, you can change the
settings for automatic detergent dosage.
ª
High: heavy soiling and staining
©
Medium: average soiling
¨
Low: light soiling
ö
Automatic dosage deselected,
manual dosage
~
Page 33
ª
High: high level of softness
©
Medium: medium level of softness
¨
Low: low level of softness
ö
Automatic dosage deselected