Bosch WAY28790GC Instruction Manual And Installation Instructions Download Page 60

Page: 60 / 60

Robert Bosch, Hausgeräte GmbH

Carl-Wery-Straße 34

81739 München

DEUTSCHLAND

*9000975498*

9000975498 (9404)

Aqua-Stop warranty

For appliances with Aqua-Stop only

In addition to warranty claims against the seller based on the contract of sale and in

addition to our appliance warranty we shall pay damages under the following

conditions:

If water damage is caused by a fault in our water safety system, we shall make

reparation for the damage with respect to private users.

The liability warranty applies to the service life of the appliance.

A claim can only be made under the warranty if the appliance and Aqua-Stop

have been correctly installed and connected according to our instructions; this

also includes a correctly installed Aqua-Stop extension (original accessory).

Our guarantee does not apply to defective cables/hoses or to fittings up to the

connection on the tap.

Appliances which feature Aqua-Stop can be left unattended during operation and

it is not necessary to turn off the tap afterwards.

The tap should only be turned off if you are away for a prolonged period, e.g.

several weeks holiday.

Summary of Contents for WAY28790GC





























































Search results

Summary of Contents for WAY28790GC

Reviews:

Related manuals for WAY28790GC

Brands by name

Popular brands

Bosch WAY28790GC, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WAY28790GC

Reviews:

Related manuals for WAY28790GC

Brands by name

Popular brands