background image

Safety

 en

7

Wear protective gloves when installing and transporting the ap-
pliance.

1.5 Safe use

WARNING ‒ Risk of electric shock!

If the appliance or the power cord is damaged, this is dangerous.

Never operate a damaged appliance.

Never pull on the power cord to unplug the appliance. Always
unplug the appliance at the mains.

If the appliance or the power cord is damaged, immediately un-
plug the power cord or switch off the fuse in the fuse box and
turn off the water tap.

Call customer services. → 

Page 47

An ingress of moisture can cause an electric shock.

Only use the appliance in enclosed spaces.

Never expose the appliance to intense heat or humidity.

Do not use steam- or high-pressure cleaners, hoses or sprays
to clean the appliance.

WARNING ‒ Risk of harm to health!

Children can lock themselves in the appliance, thereby putting
their lives at risk.

Do not install the appliance behind a door as this may obstruct
the appliance door or prevent it from opening.

With redundant appliances, unplug the power cord. Then cut
through the cord and damage the lock on the appliance door
beyond repair so that the appliance door will no longer close.

WARNING ‒ Risk of suffocation!

Children may breathe in or swallow small parts, causing them to
suffocate.

Keep small parts away from children.

Do not let children play with small parts.

Summary of Contents for WAX32MX0GC





















































Reviews: