Cleaning and servicing
en
39
2.
Clean the interior, the thread on
the pump cap and the pump hous-
ing.
The pump cap is comprised of two
parts which can be taken apart for
cleaning.
3.
Ensure that both impellers can
turn.
4.
Insert the pump cap.
‒
Ensure that the parts of the
pump cap are correctly as-
sembled.
5.
Screw the pump cap as far as it
will go.
90°
The handle on the pump cap must
be in a vertical position.
6.
Insert and close the service flap.
2
1
17.4 Cleaning the intake
opening in the rubber
gasket
Regularly check the intake opening
in the rubber gasket for any block-
ages and clean the intake opening.
1.
Open the appliance door.
Summary of Contents for WAX32LH0TC
Page 55: ......
